strain control meaning in Chinese
应变控制
Examples
- Strain control triaxial compression apparatus
室内土工试验应变控制式三轴压缩仪 - Method for constant amplitude strain controlled fatigue testing
等幅应变控制式疲劳度试验方法 - Standard practice for strain controlled thermomechanical fatigue testing
应变控制热力疲劳试验的标准规程 - Through research into the low - cycle fatigue behavior of gh4145 / sq , we found out that the control of strain at any level is not a stable course but has three obvious stages . the first stage is a rapid cyclic hardening course for any strain control
对gh4145 / sq合金在总应变幅控制下的对称拉压低周疲劳研究表明：在循环形变过程中合金主要表现为初始疲劳硬化、随后疲劳软化及最终失稳断裂三个阶段，疲劳硬化软化行为与作用应变幅相关。 - While cyclic deformation experiment under constant strain control is performed in 400 , the material shows the continuous hardening until cyclic invalidation . ( 3 ) back stress attained by kwl " s method is used to analyse the bauschinger effect during an incremental step cyclic test and cyclic deformation test under constant strain control , it is shown that back stress increases with increasing plastic strain and the numbers of cycle , and the back stress is uniform , regardless of tension or compression conditions . ( 4 ) as far as recrystallized zircaloy - 4 plate is concerned , the back stress in transverse direction is higher than that in rolling direction due to the higher schmid factor in rolling direction
对于再结晶状态的zr一4合金板材试样来说， t方向(横向)试样的背应力要高于r方向(轧制方向)的背应力，原因在于r方向的schmid因子高于t方向的schmid因子; 400下， zr一4合金的背应力要明显低于室温下的背应力;含氢200pg / g的zr一4合金的背应力大小与无渗氢的zr一4合金背应力相比，无明显区别;固溶处理后， zr一4合金的背应力大小发生了变化，在较高塑性应变下，背应力均高于固溶处理前的背应力。